Nitecore Multi-spectrum Led Flashlight With Ultraviolet Light

About this product

Note: Product does not include batteries

Nitecore's versatile and compact MH27UV Multi-Spectrum LED Flashlight is as powerful as larger search lights yet fits comfortably in your hand. This illuminator uses a white Cree XP-L HI V3 primary LED to produce four outputs from an energy-saving 1 lumen minimum output, to a darkness-piercing 1000-lumen turbo.

In addition to the white emitter, there is an array of secondary-coloured LEDs - blue, red, and ultraviolet - set around the main reflector that provide coloured light to perform tasks without interfering with night-adjusted vision. Adding to the MH27UV's versatility are three strobe modes and three coloured flashing modes that can be used for everything from directing traffic to sending a distress signal.

The light is designed with tactical professionals in mind. It has a two-stage pushbutton tailcap switch with momentary and constant-on modes. This switch has last-mode-memory for the primary outputs and strobe mode so you can set the output ahead of time and go right to that intensity or mode immediately. For special situations, users have instant access to both the UV LED light and 1000-lumen Turbo output for chequing IDs and lighting large areas or to search. An included tactical ring can be installed on the handle to help facilitate various pistol/light grip techniques.

Complementing the multiple light outputs is a housing that is built to withstand years of use. Its aluminium alloy body has a scratch and corrosion-resistant Type III hard anodised finish, with a scratch-resistant tempered reflector window that has an anti-reflection coating to maximise light transmission. The light is impact-resistant and IPX8-rated, making it fully submersible to a depth of over 6.5 feet. Heat diffusing fins built into the head provide passive overheat protection, while heat-management circuitry automatically monitors and adjusts the output and performance to prevent damage to the light. This flashlight includes a quality USB charger, holster, clip, tactical ring, lanyard, spare charging port cover, spare O-ring and a spare tailcap cover.

Key Features:
Performance
White light:
Low: 1 lumen
Moed: 55 lumen
High: 250 lumen
Turbo: 1000 lumen
Coloured light:
Blue: 3 lumen
Red: 13 lumen
UV: 500mW @ 365nm
One primary white Cree XP-L HI V3 LED
One each - Blue/Red/UV - secondary LEDs
Blue LED: Highlights fluids such as blood for tracking
Red LED: Illuminates without affecting night adjusted vision to read or perform tasks
UV LED: Use for authenticating money, IDs, etc. and fluorescence activation
Smooth aluminium reflector produces a bright centre cone of light with large, dimmer peripheral ring

Special Modes
Disorientating strobe mode
SOS distress signal: Automatically cycles through Morse code sequence
Location beacon: Emits a slow steady flash to signal location
"Police" warning signals:
Mode 1: Alternates between Red and Blue LEDs to simulate police lights
Mode 2: Flashing Red LED only
Mode 3: Flashing Blue LED only

Switching
Type: Pushbutton
Location: Tailcap and Body
Tailcap: Controls on/off with last mode memory for primary outputs and strobe mode
Body: Dual switches control output intensity and mode selection
Momentary and constant-on activation
Instant access to Turbo output and Red LED

Charge Time 6 h with one 18650 Li-ion battery installed
Construction Aluminium alloy
Waterproofing IPX8-rated, submersible to 6.6' / 2.0 m for up to 30 minutes
Impact Resistance Yes
Dimensions Head: 1.6" / 4.0 cm
Handle: 1.0" / 2.5 cm
Length: 6.1" / 15.4 cm
Weight 6.0 oz / 170.0 g, without battery